Author
|
Message
|
---|
Anon Deleted Posts : Location : Status : Offline
|
Gearbox for Ireland.
Hi to all,
At sometime today another gearbox will start its journey over to Ireland to a keep another Bedford CF on the road for a few more years.
doujoy
----------------------
|
Tue 13 Oct 2015 @ 09:19
| |
Anon Deleted Posts : Location : Status : Offline
|
Good man, you saved my bacon when you supplied me, hope this will do the same for this chap.
|
Wed 14 Oct 2015 @ 02:18
| |
Anon Deleted Posts : Location : Status : Offline
|
Gearbox.
Hi Mike,
This should help Joe get his Bedford back up and running but only if the parcel force plane accept the dimensions and weight of the package, we should hear from them today.
doujoy
----------------------
|
Wed 14 Oct 2015 @ 09:35
| |
Anon Deleted Posts : Location : Status : Offline
|
Parcel force.
Hi to all,
Joe's gearbox was collected this morning just after nine so he should have by tomorrow afternoon.
doujoy
----------------------
|
Thu 15 Oct 2015 @ 10:37
| |
Anon Deleted Posts : Location : Status : Offline
|
the gearbox from doujoy came to day thanks to him now just have to fit it
|
Mon 19 Oct 2015 @ 16:38
| |
Anon Deleted Posts : Location : Status : Offline
|
Gearbox.
Hi Joe,
That seems to have taken a while to get to you Joe, you may already know this but I thought it was worth a word that the easiest way is to unbolt the gearbox from the bell-housing, leaving it still bolted to the engine.
First thing to do is lock the clutch pedal down to the floor, this will allow you to leave the clutch cable attached and in place and also gives you access to the lower bolts inside the bell-housing, once the four bolts are out the box will slide back over the cross-member and then forwards and down leaving the cross-member in place as well.
With the clutch pedal locked down the thrust-race will stay in place locked against the clutch cover-plate, makes it a much easier and quicker job.
doujoy
----------------------
|
Mon 19 Oct 2015 @ 17:37
| |
Anon Deleted Posts : Location : Status : Offline
|
thanks for that will make it a lot faster that way
|
Tue 20 Oct 2015 @ 09:01
| |
Time in GMT
|