Bedford CF-UK Message Board Logo [Home] [Search] [FAQ]
Bedford CF-UK Message Board > CF Questions > new member trouble
[Private Message] [Register] [Profile] [Member list] [Log-in]
Who's Online:
There are 0 member(s), and 1 guest(s) online.
 
[Printable Version] [Post Reply]
Author Message
Anon
Deleted
Posts :
Location :
Status    : Offline

new member trouble

Does this work?
Sun 29 Mar 2015 @ 19:50 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Whoops. I tried 2 meassages earlier but neither worked.
Hey, I'm mark. I was reading a message about fiber glassing my roof gutters as they at rusted and leaking and I wondered would I just use fiber cloth and resin and could I do it all the way around? Also my gauges don't work right, fuel always full (earthing problem?) And temp gauge doesn't move even after 150 miles. Any help would be great fully received.
Thanks guys!
Sun 29 Mar 2015 @ 19:53 Edit this messageQuote this messagePMQuote this message
bluebedouin
Global Moderator
Posts : 2444
Location : Northampton,England.
Status    : Offline

Hi Mark,welcome to the forum.Can't see a problem with what you're proposing re fibre glassing.Gauge problems could have quite a few causes.As you say,earthing problem would be first guess.Could also be senders not working correctly.
It's going to be a case of tracing from start to finish unfortunately.

----------------------
Sun 29 Mar 2015 @ 20:27 View bluebedouin   Email bluebedouin   Edit this messageQuote this messagePMQuote this message
Colin Birch
Admin
Posts : 4275
Location : Pontypridd, South Wales
Status    : Offline

mark_the_shark wrote:
Whoops. I tried 2 meassages earlier but neither worked.

What happened? Did you get any error messages?
Hey, I'm mark. I was reading a message about fiber glassing my roof gutters as they at rusted and leaking and I wondered would I just use fiber cloth and resin and could I do it all the way around?

I see no reason why not.
Also my gauges don't work right, fuel always full (earthing problem?) And temp gauge doesn't move even after 150 miles. Any help would be great fully received.

What CF do you have ? Is it a CF(up to 1980 with metal grill), CF Facelift(1980 to 84) or CF2(84 on) ? Have you tried taking the wire off the temp sender and touching it to earth? Does the gauge move then?

----------------------
Colin Birch - CF-UK Admin
Pontypridd, S.Wales
The Bedford CF Web Site
http://www.cf-uk.co.uk
Mon 30 Mar 2015 @ 09:33 View Colin Birch   Email Colin Birch   Colin Birch Home Page   Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

fiber glass

Hi Mark,I fiber glassed nearly all of my guttering.the first thing to do is.I hope this helps.Cheers+Beers,Jim.clean it then you will need to weld as much of the roof to the guttering as possible,this is for strength.You can buy a 2" tap that fits just right for the fiberglassing.I hope this helps,Cheers+Beers, Jim.

----------------------
Mon 30 Mar 2015 @ 20:14 Edit this messageQuote this messagePMQuote this message
Time in GMT
[Post Reply]
New posts since your last visit Administrative Functions: Open/Close/Delete Thread / Move Thread
Old post

Forum Jump:

Back to the CF-UK Homepage ][ Email CF-UK

Powered by FunkBoard vCF0.74c