|
|
[Home] [Search] [FAQ] |
|---|---|
| [Private Message] [Register] [Profile] [Member list] [Log-in] |
| Who's Online: |
| There are 0 member(s), and 1 guest(s) online. |
| [Printable Version] [Post Reply] |
| Author | Message |
|---|---|
|
Anon Deleted Posts : Location : Status : Offline |
1981 cf 280 Heater always blows hot dashboard operation makes no differenceHelp Any ideas 
---------------------- |
 Tue 30 Jul 2013 @ 21:47
|    |
|
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline 
|
Disconnect it in the summer.Reconnect it in the winter! 
Or you could look to see whether the cable is still connected to the valve & if it opens/closes.If not probably needs a new valve.I did see one on greedbay recently,I'll see if it's still there. It's not the one I'd seen but there's this one.151047943662 ---------------------- |
Tue 30 Jul 2013 @ 21:57
|
|
|
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline 
|
on the 81 Beddy you could have the later heater fitted . the 1 with a capillary tube wound around the face of the heater matrix. theses can cause trouble if the tube fails . 1 way to stop the heater blowing hot air is to bypass the heater matrix just for summer though |
Tue 30 Jul 2013 @ 22:54
|
|
| Time in GMT | |
| [Post Reply] | |
 New posts since your last visit |
Administrative Functions: Open/Close/Delete Thread / Move Thread |
 Old post |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c