|
|
[Home] [Search] [FAQ] |
|---|---|
| [Private Message] [Register] [Profile] [Member list] [Log-in] |
| Who's Online: |
| There are 0 member(s), and 1 guest(s) online. |
| [Printable Version] [Post Reply] |
| Author | Message |
|---|---|
|
Anon Deleted Posts : Location : Status : Offline |
Manifold to exhaust gasket needed HIhaving got my shiny new exhaust ready and the old manky one off the vehicle I discover that the flange gaskets I bought a while back are the wrong size. AAAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGHHHHHHHHHHHHHHH! I'm guessing Adrian Bailey will probably have one but just wondering if this TK version is the same size? 310264968983 It's listed as part no 91032410 The internal diameter needs to be 1 7/8" or 48mm. It's a2.3L petrol slant engine. Tony ---------------------- |
 Sat 17 Mar 2012 @ 15:47
|    |
|
Anon Deleted Posts : Location : Status : Offline |
TK exhaust packing ring is way too big unfortunately. If you can find a wire composite ring the right size (local exhaust fitting place may have a selection) then it should do the job & probably will last longer than the filled copper ring (bad idea anyway on the CF - later manifolds shaped to seat in the front pipe & do away with the ring). ---------------------- |
Sat 17 Mar 2012 @ 16:46
| |
|
Anon Deleted Posts : Location : Status : Offline |
I`m sure when asking about similar a while back,the guy in kwik-fit told me the old jag one is the same,can`t remember the model though,i.e mk2/3 etc,might be worth asking. ---------------------- |
Sat 17 Mar 2012 @ 18:43
| |
| Time in GMT | |
| [Post Reply] | |
 New posts since your last visit |
Administrative Functions: Open/Close/Delete Thread / Move Thread |
 Old post |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c