Bedford CF-UK Message Board Logo [Home] [Search] [FAQ]
Bedford CF-UK Message Board > CF Questions > Window winders?...
[Private Message] [Register] [Profile] [Member list] [Log-in]
Who's Online:
There are 0 member(s), and 1 guest(s) online.
 
[Printable Version] [Post Reply]
Author Message
Anon
Deleted
Posts :
Location :
Status    : Offline

Window winders?...

The half moon shape gear arm that lifts the glass window up and down inside my driversd door has lost it's 4 and 5 th from last teeth(hope that makes sense),which prevents it from going all the way up as the hand winder gear cog does not ave anything to cog to.lol......the window however can be wound all the way down,my theory....can I disengage the the winder cog from the half moon arm,adjust as necessary and then reengage the two,resulting in the arm being able to be wound all the way up but not all the way down,?.......

----------------------
Sat 11 Feb 2012 @ 20:31 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Short answer: no.

Regulator lever arm riveted to the quadrant would have to be re-positioned on the quadrant in order to change the operating range of the quadrant teeth.

A possible work-around if it's the driver side that's worn is to dismantle a passenger side regulator (as being less likely to be worn out) & turn the quadrant over.

Not something I've tried yet (in th'old days regulators were easy to find) but I've got a duff regulator to play with so I'll move it up the ToDo list & see what's involved.

----------------------
Sat 11 Feb 2012 @ 21:22 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

I'm lost

What's is a regulator lever arm and a quadrant phil? Remember some of us thick as ..............
Sat 11 Feb 2012 @ 22:14 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Quadrant is the bit with teef in/missing; same thing both sides but installed mirror image on the winder bracket that bolts to the door.

Lever arm is the arm with one roller that's riveted to the quadrant.

Other arm with 2 rollers that pivots in the lever arm is the balance arm.

----------------------
Sat 11 Feb 2012 @ 22:49 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

winder



have sent you pm

----------------------
Mon 13 Feb 2012 @ 09:47 Edit this messageQuote this messagePMQuote this message
Time in GMT
[Post Reply]
New posts since your last visit Administrative Functions: Open/Close/Delete Thread / Move Thread
Old post

Forum Jump:

Back to the CF-UK Homepage ][ Email CF-UK

Powered by FunkBoard vCF0.74c